UNITED STATES OF AMERICA
In the Matter of
THE STANLEY WORKS, a corporation.
FILE NO. 982-3570
AGREEMENT CONTAINING CONSENT ORDER
The Federal Trade Commission has conducted an investigation of certain acts and practices of The Stanley Works, a corporation ("proposed respondent"). Proposed respondent, having been represented by counsel, is willing to enter into an agreement containing a consent order resolving the allegations contained in the attached draft complaint. Therefore,
IT IS HEREBY AGREED by and between The Stanley Works, by its duly authorized officers, and counsel for the Federal Trade Commission that:
1. Proposed respondent The Stanley Works is a Connecticut corporation with its principal office or place of business at 1000 Stanley Drive, New Britain, Connecticut 06053.
2. Proposed respondent admits all the jurisdictional facts set forth in the draft complaint.
3. Proposed respondent waives:
4. This agreement shall not become part of the public record of the proceeding unless and until it is accepted by the Commission. If this agreement is accepted by the Commission, it, together with the draft complaint, will be placed on the public record for a period of sixty (60) days and information about it publicly released. The Commission thereafter may either withdraw its acceptance of this agreement and so notify proposed respondent, in which event it will take such action as it may consider appropriate, or issue and serve its complaint (in such form as the circumstances may require) and decision in disposition of the proceeding.
5. This agreement is for settlement purposes only and does not constitute an admission by proposed respondent that the law has been violated as alleged in the draft complaint, or that the facts as alleged in the draft complaint, other than the jurisdictional facts, are true.
6. This agreement contemplates that, if it is accepted by the Commission, and if such acceptance is not subsequently withdrawn by the Commission pursuant to the provisions of Section 2.34 of the Commission's Rules, 16 C.F.R. § 2.34, the Commission may, without further notice to proposed respondent: (1) issue its complaint corresponding in form and substance with the attached draft complaint and its decision containing the following order in disposition of the proceeding; and (2) make information about it public. When so entered, the order shall have the same force and effect and may be altered, modified, or set aside in the same manner and within the same time provided by statute for other orders. The order shall become final upon service. Delivery of the complaint and the decision and order to proposed respondents address as stated in this agreement by any means specified in Section 4.4(a) of the Commission's Rules, 16 C.F.R. § 4.4(a), shall constitute service. Proposed respondent waives any right it may have to any other manner of service. The complaint may be used in construing the terms of the order. No agreement, understanding, representation, or interpretation not contained in the order or in the agreement may be used to vary or contradict the terms of the order.
7. Proposed respondent has read the draft complaint and consent order. It understands that it may be liable for civil penalties in the amount provided by law and other appropriate relief for each violation of the order after it becomes final.
IT IS ORDERED that respondent, The Stanley Works, a corporation, its successors and assigns, and its officers, agents, representatives, and employees, directly or through any corporation, subsidiary, division, or other device, in connection with the manufacturing, marking, labeling, packaging, advertising, promotion, offering for sale, sale, or distribution of any mechanics tool in or affecting commerce, as "commerce" is defined in section 4 of the Federal Trade Commission Act, 15 U.S.C. § 44, shall not misrepresent, in any manner, directly or by implication, the extent to which any such mechanics tool is made in the United States. For purposes of this order, mechanics tools means professional grade hand tools (other than carpentry tools) used by consumers or professionals in the assembly, repair, or maintenance of machinery or vehicles, or for other purposes. Such tools include, but are not limited to, wrenches, ratchets, sockets, and chisels.
PROVIDED, however, that a representation that any mechanics tool is made in the United States will not be in violation of this order so long as all, or virtually all, of the component parts of the mechanics tool are made in the United States and all, or virtually all, of the labor in manufacturing the mechanics tool is performed in the United States.
PROVIDED, further, that this order shall not apply to the marking of mechanics tools or components of mechanics tools forged, machined, or cast before the date that the complaint and order became final.
IT IS FURTHER ORDERED that respondent The Stanley Works and its successors and assigns, shall, for five (5) years after the last date of dissemination of any representation covered by this order, maintain and upon request make available to the Federal Trade Commission for inspection and copying:
IT IS FURTHER ORDERED that respondent The Stanley Works, and its successors and assigns, shall deliver a copy of this order to all current and future principals, officers, directors, and managers, and to all current and future employees, agents, and representatives having responsibilities with respect to the subject matter of this order, and shall secure from each such person a signed and dated statement acknowledging receipt of the order. Respondent shall deliver this order to current personnel within thirty (30) days after the date of service of this order, and to future personnel within thirty (30) days after the person assumes such position or responsibilities.
IT IS FURTHER ORDERED that respondent The Stanley Works, and its successors and assigns, shall notify the Commission at least thirty (30) days prior to any change in the corporation that may affect compliance obligations arising under this order, including but not limited to a dissolution, assignment, sale, merger, or other action that would result in the emergence of a successor corporation; the creation or dissolution of a subsidiary, parent, or affiliate that engages in any acts or practices subject to this order; the proposed filing of a bankruptcy petition; or a change in the corporate name or address. Provided, however, that, with respect to any proposed change in the corporation about which respondent learns less than thirty (30) days prior to the date such action is to take place, respondent shall notify the Commission as soon as is practicable after obtaining such knowledge. All notices required by this Part shall be sent by certified mail to the Associate Director, Division of Enforcement, Bureau of Consumer Protection, Federal Trade Commission, Washington, D.C. 20580.
IT IS FURTHER ORDERED that respondent The Stanley Works, and its successors and assigns, shall, within sixty (60) days after the date of service of this order, and at such other times as the Federal Trade Commission may require, file with the Commission a report, in writing, setting forth in detail the manner and form in which it has complied with this order.
This order will terminate twenty (20) years from the date of its issuance, or twenty (20) years from the most recent date that the United States or the Federal Trade Commission files a complaint (with or without an accompanying consent decree) in federal court alleging any violation of the order, whichever comes later; provided, however, that the filing of such a complaint will not affect the duration of this order if such complaint is filed after the order has terminated pursuant to this Part. Provided, further, that if such complaint is dismissed or a federal court rules that the respondent did not violate any provision of the order, and the dismissal or ruling is either not appealed or upheld on appeal, then the order will terminate according to this Part as though the complaint had never been filed, except that the order will not terminate between the date such complaint is filed and the later of the deadline for appealing such dismissal or ruling and the date such dismissal or ruling is upheld on appeal.
Signed this day of , 1998
THE STANLEY WORKS
Stephen S. Weddle
John D. Harkrider
Laura D. Koss
Kent C. Howerton
ELAINE D. KOLISH
JOAN Z. BERNSTEIN